The Bumotec s191H From Starrag Hits the Target by Producing Complete Firearm Slides for the Sports Gun Industry in One Machine Cycle

Probably the most important aspect of sport shooting is accuracy. People see it in the Olympics, on the range and in the field. Exactness is shooting’s time-honored metric. Numerous factors impact accuracy, however — stance, aim, breathing, distance to the target, control, backdrop and, of course, the firearm itself.
While Starrag can’t control the human aspect of shooting, it does play a key role in helping produce a precise firearm slide both affordably and efficiently.
In years past, up until the present, machining of firearm slides has often been produced on machining centers equipped with tombstone fixtures. Blank material is brought to the machine where the clamped part undergoes milling and, in some cases, EDM machining. The net shape is then deburred and hand finished. Sounds simple. But after a closer look, this process is rife with setups and always includes more than one machine to finish one slide. Starrag’s approach is different.
Productivity and flexibility distinguish Bumotec machines from other machining centers.
The Bumotec s191H is able to produce firearm slides complete from 17-4 stainless steel material, in 45 minutes unmanned. Using a quick mill strategy comprised of small tools, high-speed linear motors with a direct drive torque spindle, the slide is finished and ready for sand blasting in less than one hour. Deburring and decorative operations are easily incorporated into the numerical control (NC) program. The machine’s 1.2 G accelerated drives with 30,000 rpm spindle motor produce quick cuts that generate smooth-to-the-touch surface finishes. Additionally, high pressure through the tool coolant blasts chips away from the slide’s hard-to-access areas, such as the firing pin. This allows for long gun drilling operations to be performed. All slides include a slotted feature that guides the barrel. Machining centers struggle to produce this square slot due to tool radius in the corner. At this point, the slide is often removed and taken offline to an EDM for electric discharge machining. This is an extra step that introduces costs. That’s not the case with the Bumotec s191H. The s191H easily broaches the slotted feature, producing sharp clean corners. This saves time, eliminates the need to use an EDM and delivers part-to-part consistency.
U.S. firearm manufacturing market
According to the 2020 edition of its Firearm Production Report issued by the industry’s trade association NSSF®, 11.4 million firearms were produced in the United States or imported in 2018, the latest available statistical year.
Other statistics from the report include:
Slide manufacturing is a form of art
Firearm manufacturing in the United States is a big business. But manufacturing slides affordably and efficiently can require endless hours to get it right.
Slide producers who regularly engage with Starrag say that the way a slide feels in the shooter’s hand is very subjective. By the time producers get to a point where the firearm can be tested, countless hours of design and testing have already gone into producing the slide. Often, the slide is fired thousands of times only to be redesigned or significantly augmented. The Bumotec s191H saves time during this prototyping phase. “With the s191H, slide designers can change features in the program ‘on the fly.’ This shortens the time it takes to get to a finished design,” said Greg Dunkley, Starrag Vice President Sales Precision Engineering North America. Simulation of NC programs offline with computer-aided manufacturing packages are a great benefit. At this point, tool selection is optimized during simulation ensuring the best tool-cutting path. Starrag’s customized tool management module complements part-programming with easy-to-read intuitive tool menus — again saving time. Another significant cost saver is Starrag’s unique work-holding system. Because the Bumotec s191H uses collets and a jaw vice, any major or minor change to the slide does not require new work-holding or custom fixtures. This is generally not the case with machining centers. As an extra benefit, a Renishaw part probe is stored in the (90) station tool carousel. It’s called up during the program and used for measuring critical features such as the front and rear sight guides.
After 61 operations, the finished slide is unloaded with Starrag’s integrated automated pallet tray system.
11-step process in Starrag gun slide manufacturing
The CNC process starts with a bar puller advancing rough bar stock through the Bumotec s191H’s main spindle passage, followed by 11 steps:
Always a question of costs
Part of the unique value proposition of any Bumotec machining center is finishing a part complete in one cycle. The slide is no different. For owners of Bumotec machines, this means that one person operates one to several machines. The strategy is to have anything that needs to be done to the part — except heat treat or painting — performed on the Bumotec. This is where gains can truly be measured. Higher margins can be realized using a Bumotec machining center by reducing manpower, ancillary machines, large work-holding inventories and changeover times. Together, this equals an efficient, robust and profitable formula.
For anyone interested in producing slides COMPLETE from bar or raw blank lights out, then the Bumotec s191H is THE fast and proven choice. The Bumotec s191H’s inherent rigidity coupled with its unique kinematics will help achieve cycle times that are right on target to meet performance and profitability metrics.
Be sure and check out the slide video on the Starrag TV YouTube Channel: Precision part machining in one.
Company profile Starrag
High-precision machine tools for greater productivity
Starrag Group is a global technology leader in manufacturing high-precision machine tools for milling, turning, boring and grinding workpieces of metallic, composite and ceramic materials. Principle customers are internationally active companies in the Aerospace, Energy, Transportation and Industrial sectors (Industrial Components, Luxury Goods, Med Tech). In addition to its portfolio of machine tools, Starrag Group provides integrated technology and maintenance services that significantly enhance customer quality and productivity.
The umbrella brand Starrag unites the product ranges Berthiez, Bumotec, Dörries, Droop+Rein, Ecospeed, Heckert, Scharmann, SIP, Starrag, TTL and WMW. Headquartered in Rorschach, Switzerland, the Starrag Group operates manufacturing plants in Switzerland, Germany, France, the UK and India and has established a network of sales and services subsidiaries in the most important customer countries.
The shares of Starrag Group Holding AG are listed on the SIX Swiss Exchange.
For more information:
Elena Schmidt-Schmiedebach
Lead Marketing North America
Mobile: +1 (859) 380-2356
Source: Starrag USA, Inc.